● These swing clamps are used when it is required to keep the fixture workpiece area free of straps and
clamping components for unrestricted workpiece loading and unloading.
● This hydraulic clamping element is a pull type cylinder, There are five standard sizes, and for each size
two versions of standard clamping arms, mounting of these clamping arms at any angle within 360° .
Note:
● Please don't exceed 1.5 times of th original length, if it is necessary to increase the length of the
clamping arm.
● Suggested to install a flow control valve protect cylinder barrel and internal components against fretting
wear.
Type | THS_FC / THD_FC / THS_MF / THD_MF | THS_F / THD_F |
Bore sizes of cylinder (mm) | Ø 25, Ø 32, Ø 40, Ø 50, Ø 63 | Ø 25, Ø 32, Ø 40, Ø 50 |
Operation | Double acting | |
Power fluid | Filtered oil | |
Max. Pressure (MPa) | 10(100kgf/cm²) | |
The range of pressure (MPa) | 0.5 ~ 7(5 ~ 70kgf/cm²) | |
Material of cylinder barrel | Carbon steel | |
Standard angle of rotation | 90±2°(Angles of 0°,45° and 60° are optional) |
|
Rotating direction | Clockwise or counter clockwise |