● These swing clamps are used when it is required to keep the fixture workpiece area free of straps and
clamping components for unrestricted workpiece loading and un-loading.
● This pneumatic clamping element is a pull type cylinder, There are five standard sizes, and for each size
two versions of standard clamping arms,mounting of these clamping arms at any angle within 360°
● Please don't exceed 1.5 times of the original length, if it is necessary to increase the length of the
clamping arm.
● Suggested to install a flow control valve protect cylinder barrel and internal components against fretting
wear.
Type | TAS_FC TAD_FC | TAS_FA TAD_FA | ||||||
Bore sizes of cylinder (mm) | Ø32 | Ø40 | Ø50 | Ø63 | Ø32 | Ø40 | Ø50 | Ø63 |
Operation | Double acting | |||||||
Power fluid | Filtered air with or without lubrication | |||||||
Max. pressure (MPa) | 1.03 | |||||||
The range of pressure (MPa) | 0.1 ~ 1.03 | |||||||
Material of cylinder barrel | Anodised aluminium alloy | |||||||
Standard angle of rotation | 90° ±2° (Angle of 0° ,45° and 60° are optional) | |||||||
Rotating direction | Clockwise or counter clockwise |