● These swing clamps are used when it is required to keep the fixture workpiece area free of straps and
clamping components for unrestricted workpiece loading and un-loading.

● This pneumatic clamping element is a pull type cylinder, There are five standard sizes, and for each size
two versions of standard clamping arms,mounting of these clamping arms at any angle within 360°

● Please don't exceed 1.5 times of the original length, if it is necessary to increase the length of the
clamping arm.

● Suggested to install a flow control valve protect cylinder barrel and internal components against fretting
wear.

 

Specification

Type	TAS_FC　TAD_FC					TAS_FA TAD_FA
Bore sizes of cylinder (mm)	Ø25	Ø32	Ø40	Ø50	Ø63	Ø32	Ø40	Ø50	Ø63
Operation	Double acting
Power fluid	Filtered air with or without lubrication
Max. pressure (MPa)	1.03
The range of pressure (MPa)	0.1 ~ 1.03
Material of cylinder barrel	Anodised aluminium alloy
Standard angle of rotation	90° ±2° (Angle of 0° ,45° and 60° are optional)
Rotating direction	Clockwise or counter clockwise

How to order