Specification

Model		MP41P (Positive)
Rated pressure range		0.000 ~ 1.000 MPa
Setting pressure range		-0.100 ~ 1.000 MPa
Withstand pressure		1.5 MPa
Fluid		Air, Non-corrosive gases, incombustible gases
Set pressure resolution	MPa	0.001
	kgf/cm²	0.01
	bar	0.01
	psi	0.1
Power supply voltage		12 to 24V DC ±10%, Ripple(P-P) 10% or less
current consumption		≦ 40mA(With no load)
Switch output		NPN open collector Max. load current : 125mA Max. supply voltage : 30V DC Residual votage : ≦ 1.5V (load current 125mA)	PNP open collector Max. load current : 125mA Max. supply voltage : 24V DC Residual votage : ≦ 1.5V (load current 125mA)
Repeatability(Switch output)		≦ ±0.2% F.S. ±1 digit
Hysteresis	One point set mode	Adjustable
	Hysteresis mode
	Window com parat or mode
Response time		Chattering-function : 0.05s, 0.25s, 0.5s, 1s, 2s, 3s selection
Output short circuit protection		Yes
7 segment LED display		Two color(Red/Green) main & unit display. Orange sub-display(Sampling rate : 5 times/1 sec.)
indicator accuracy		≦ ±0.2% F.S. ±1 digit(ambient temperature : 25 ±3℃)
Switch ON Indicator		Orange OUT 1 Indicator
Environment	Encolsure	IP40
	Ambient temp. range	Operation:0~50℃, Storage:-10~60℃ (No condensation or freezing)
	Ambient humidity range	Operation/Storage:35~85% RH (No condensation)
	Withstand voltage	100V AC in 1-min(between case and lead wire)
	Insulation resistanace	50MΩ min.(at 500V DC between case and lead wire)
	Vibration	Total amplitude 1.5mm or 10G,10Hz-150Hz-10Hz scan for 1 minute,two hours each direction of X,Y and Z
	Shock	100m/s²(10G),3 times each in direction of X,Y and Z
Temperature characteristic		≦ ±2% F.S. of detected pressure (25℃) at temp. Range of 0~50℃
Lead wire		Oil-resistance cable(0.15mm²)
Weight		Approx 65g(with 2-meter lead wire),Approx 30g(with male connector)

How to order